NWWT upcoming events

Spindle Turning Basics Class -Q2-2026 (18 Apr 2026)

Sat, 18 Apr 2026 15:30:00 GMT

Spindle Turning Basics Class

Saturday, April 18th, 2026

8:30am - 3:30pm

Dave Wood's Shop
24250 SW 65th Ave, Tualatin OR 97062.

Requirements and general information

Students must be members of NWWT
Class will be limited to 7 students - one per lathe
Instructors are experienced NWWT members
4 Sharpening systems will be available
All wood will be supplied
Students bring their own PPE (face shields, dust protection)
Coffee and snacks will be provided, but bring your own lunch.

Course Objective
The primary objective of this course is to walk beginners through making basic spindle pieces such as a candle stick, honey dipper or simple toy. This course is targeted at people who have never turned wood, or who want to take a refresher course before advancing to the next level of spindle turning expertise.

7 lathes available for students plus the instructor's lathe.
Class binder with notes and reference materials for all
Prerequisite woodturning skills: none required

Agenda

Morning

Sharpening the tools required for class with help from the instruction staff.
Mount a blank on the lathe and turn to a cylinder
Demonstrations and practice making coves and beads

Lunch Hour – Demonstrations and Q&A session during lunch

Afternoon

Continue practicing while making a basic spindle form.
Pick a second simple spindle project and turn.

Tools you need

Note: If you do not have any tools yet, loaner tools are available. We recommend you wait until after the class to buy tools so you know what to buy, and what not to buy.

Spindle Roughing Gouge.
Spindle Gouge
Parting Tool

Bowl Turning Basics Class - Q2-2026 (19 Apr 2026)

Sun, 19 Apr 2026 15:30:00 GMT

Bowl Turning Basics Class

Sunday, April 19th, 2026

8:30am - 3:30pm

Dave Wood's Shop
24250 SW 65th Ave, Tualatin OR 97062.

Requirements and general information

Students must be members of NWWT
Class will be limited to 7 students - one per lathe
Instructors are experienced NWWT members
4 Sharpening systems will be available
All wood will be supplied
Students bring their own PPE (face shields, dust protection)
Coffee and snacks will be provided, but bring your own lunch.

Course Objective

The primary objective of this course is to walk beginners through making a wooden bowl. This course is targeted at people who have never turned wood, or who want to take a refresher course before advancing on to the next level of bowl turning expertise.

Prerequisite woodturning skills: None required,

Agenda

Morning

Sharpening the tools required for class with help from the instruction staff.
Mount a green blank between centers; flatten bowl bottom surface; cut a tenon
Mount blank in a chuck

Lunch Hour – Demonstrations and Q&A session during lunch

Afternoon

Instruction on the basic push-cut and pull-cut techniques
Cut the exterior shape and interior surface, and smooth with scraper
Reverse the bowl and finish cut the bottom
Start a second bowl (time permitting) to finish at home
Each student will take home one bowl and one blank for practice.

Tools you need

Note: If you do not have any tools yet, loaner tools are available. We recommend you wait until after the class to buy tools so you know what to buy and what not to buy.

Bowl Gouge: ½” or 5/8”
Scraper: left-hand French curve style for inside bowl surface. A round-nose scraper is acceptable.
Parting tool or Skew – for touching up tenons and recesses for bowl mounting

NWWT General Meeting - Kevin Jesequel "Hollow Forms" (07 May 2026)

Fri, 08 May 2026 02:00:00 GMT

May 7, 2026 Meeting

Kevin Jesequel "Hollow Forms"

7:00pm - 9:00pm

Hybrid Meeting - live at the MAC and on Zoom

HERE

Kevin’s work shows exceptional turning skills as well as design expertise. He's been featured in the AAW Magazine and does demos for other clubs and symposiums around the country. I’m sure you have seen many of his pieces at show and tell and he will have a booth at Gathering of the Guilds this year – April 24-26 at the Oregon Convention Center.

Bowl Turning 201 - Plate/Platter Class - Q2-2026 (16 May 2026)

Sat, 16 May 2026 15:30:00 GMT

Bowl Turning 201 - "Plate/Platter" Class

Saturday, May 16th, 2026

8:30am - 4:00pm

Dave Wood's Shop
24250 SW 65th Ave, Tualatin OR 97062.

Requirements and general information

Students must be members of NWWT
Class will be limited to 7 students - one per lathe
Instructors are experienced NWWT members
4 Sharpening systems will be available

All wood will be supplied
Students bring their own PPE (face shields, dust protection)
Coffee and snacks will be provided, but bring your own lunch.

Course Objectives:

The primary objective of this course is to refine your skills in the finer details of bowl turning. When you look at a bowl, your eye is very discerning. You will learn optimal bowl shapes, rim designs, and base options. Skills learned here will help you advance to the next level of expertise.

Each student should complete one piece in class. Sanding and finish application included, time permitting.

Prerequisite Skills

If you have not yet developed the skills below or are unsure, please attend an open shop and talk with one of the helpers before registering for this course.

Ability to prepare and mount a bowl blank between centers, and in a chuck using a tenon or a recess
Ability to shape the outside and inside of a bowl using a bowl gouge
Ability to use a scraper for finishing the inside of a bowl
Ability to complete a basic bowl except for sanding and applying finish

Agenda

Morning

Tune-up/sharpen tools for the class with help from the staff.
Presentation on advanced design and form concepts, shape, rims, bottoms
Review of bowl gouge grinds: 40/40, traditional (50°), bottom (65°-75°), Ellsworth, etc
Mounting options: when to use a tenon or recess
Turn a “once-turned” bowl through the finish-cutting stage with a green blank

Lunch Hour:
Additional Demonstrations and Q&A session during lunch

Afternoon

Turn a roughed and dried blank supplied (or bring your own) to the point of final scraping:
Learn methods for truing warped tenon or recess for re-mounting
Learn methods of cutting thinner wall thickness
Learn methods of scraping thin-walled bowls
Discuss sanding and finishing options if time permits

Tools to bring

Bowl gouge(s) – ½” or 5/8” are good sizes. If you have several with different grinds, bring them all.
Bowl scraper – left hand French curve style is ideal for inside, but a round-nose also works
Parting tool or skew for fine-tuning tenons/recesses

Spindle Turning 201 -Lidded Box - Q2-2026 (17 May 2026)

Sun, 17 May 2026 15:30:00 GMT

Spindle Turning 201 - "Lidded Box" Class

Sunday, May 17th, 2026

8:30am - 4:00pm

Dave Wood's Shop

24250 SW 65th Ave, Tualatin OR 97062

Requirements and general information

Students must be members of NWWT
Class will be limited to 7 students - one per lathe
Instructors are experienced NWWT members
4 Sharpening systems will be available
All wood will be supplied
Students bring their own PPE (face shields, dust protection)
Coffee and snacks will be provided, but bring your own lunch

Course Objectives
The primary objective of this class is to teach additional spindle turning skills. There are a variety of techniques learned in this class that are applicable to many other types of turning projects.

We will introduce you to use of the skew in this class.

Prerequisite Skills: If you have not developed the skills described below or are unsure, attend an open shop session and discuss it with one of the helpers before registering for this course. Skills required are:

Use of a rouging gouge to round square stock.
Use of a spindle gouge to make beads and coves
Use of a parting tool.

Agenda

Sharpen all tools used for the class with help from the instruction staff.
Practice beads and coves with the spindle gouge as a warm-up exercise
Discussion of pepper mill designs from simple to more complex, hollowing techniques and tools

Tools you need to bring

Spindle Roughing Gouge 1” or larger is ideal. ¾” is ok.
Spindle gouge: ½” or 3/8”. Bring both if you have them
Parting tool: 1/8” diamond profile is very versatile, but thin kerf (1/16”) is also useful.
Small round-nose scraper or box scrapper
Skew: 1” or larger